Seewell is the only device on the market that removes rain and fog from your helmet's visor in a single pass.
No batteries, no wires, no adapters: a magnetic system that mounts in seconds and always works, because your safety shouldn't depend on whether you remembered to charge it.
- Compatible with most helmets on the market (full-face, modular, and open-face)
- Compact and discreet, it fits in any pocket or motorcycle compartment
- No batteries or electronics, always available!
- Mounts and dismounts in seconds, no adapters needed
- Does not scratch the visor
- Available in three colors
Clear vision in under 10 seconds
Forget the hassle: with Seewell, restoring perfect vision is as easy as a wave of the hand.
- Separate the pieces in a second. Pull one end to separate the two pieces. It's that simple.
- Attach it and forget about it. Magnetize each piece to the lower side of your visor. With the visor closed, place it in the resting position. No tools, no adapters.
- When Using It. The cleaning blades must be in contact with the visor's surface on both pieces.
- When Storing It. Join the two pieces, leaving the cleaning blades opposite to the contact area.
- Secure the first use. Stick the safety stops only once on a clean surface and let it rest for 24 hours for greater durability.
- Activate it when you need it. As soon as fog or rain appears, slide Seewell from one side to the other and regain your vision instantly.
Done. Enjoy the road again. That's the Seewell feeling: total control, zero distractions.
For Seewell to give you its 100%
We tell you everything, with no fine print, so you can get the most out of it from the very first kilometer.
Live with your Pinlock, but not at the same time.
If your helmet has Pinlock or a similar anti-fog system, Seewell is not compatible with it. Choose the one that best suits your ride.
Extreme curves are best on the road
Works best on visors with standard vertical curvature; on some very curved ones, like bubble type, performance may vary.
A gesture, not an eternal promise.
The effect is not permanent: it's mechanical, so activate it every time mist or rain appears. One gesture and you'll have full visibility.
Your vision, always protected.
When not in use, leave it to the side, leaving at least 90° of your field of view clear.
It's not a hull cleaner.
Removes water and fog, not dirt or mud. For that, a cloth and water are better.
Like everything, better lubricated
When dry it is a little difficult, that is normal. When wet, with mist or humidity, it slides easily.
The opinion that matters most to us: yours.
Spectacular!! great invention…it doesn't move, it doesn't bother you!, simple and very practical!
— Miguel Ángel M.
Very comfortable to use and really useful when it's humid or raining.
— Martha S.
I was quite surprised. As soon as it starts raining, it's very much appreciated. I had a problem with the delivery and they solved it immediately.
— Jaime V.
Good product, simple yet effective. Also, shipping was quite fast
— Diego H.
And it's not just you saying it. This is what the specialized media have reported about Seewell.
SEEWELL®
FAQs
Does it work with any helmet?
Our anti-fog and anti-rain device for motorcycle helmets is universal and adapts to almost any type of helmet with a visor (full-face, modular, or open-face), without the need for adapters or tools. It is not compatible with visors that have a lot of curvature, or that have a Pinlock or similar accessory.
For more details, consult the legal warnings.
Is it easy to install and remove?
Very easy. SEEWELL assembles and disassembles in seconds thanks to its magnetic system. It requires no glues or additional parts, and can be removed when not needed.
Be careful when storing it so as not to damage the cleaning lips.
For more details, consult the legal warnings.
Under what weather conditions does it work?
Seewell was designed and tested for harsh weather conditions. Its special surface pattern helps drain water, and its flexible structure withstands moisture and cold without losing effectiveness.
For more details, see the legal warnings.
Does it need batteries or charging?
No. Seewell, our anti-fog and rain-repellent system for motorcycle helmets, is 100% mechanical. It has no electronic components, cables, or batteries. It works whenever you need it, without relying on technology.
Does it work to clean dirt from the helmet?
No, this could damage both the screen and the Seewell itself.
For more details, see the legal warnings.
Can it be returned?
Yes, for the next 30 calendar days after your purchase, provided the packaging has not been opened or there is no manufacturing problem.
For more details, please see the return policy.
Does it work to remove only rain or only condensation?
Seewell has been tested in various situations. Although it is an effective rain repellent, with humidity on both sides, it has also proven functional as an anti-fog for motorcycle helmets when there is only humidity on one side.
Its performance may be impacted by the helmet model.
What factors influence the functioning of Seewell?
Seewell's operation depends primarily on three parameters:
- Presence of moisture or water on both sides of the helmet visor. More moisture means better performance.
- Vertical curvature of the visor (from bottom to top). The less curvature, the better the performance.
- Visor condition. The fewer scratches or scrapes it has, the better the results.
